DIRECTPAD PRO DRIVER

The most common problem is that it does not do anything. Cut the cable with the scissors with care not cutting any of wiers that are in the interior. The pins in blue are those that we will use if we connect a second pad. Now we take the soldering iron and tin-plate the end of each diode taking care that you do not taking too long doing it or you can damage the diode by the heat. We are going to find out to what hole of the female connector is connected to which small wire. You can connect simultaneously up to two pads. The pins where we are going to make connections are in red.

Uploader: Faezragore
Date Added: 4 May 2010
File Size: 54.58 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 93032
Price: Free* [*Free Regsitration Required]

The assembly is not very complicated. In theory it would have to work with any control system of game for PlayStation pad of another mark, steering wheel, etc. The directional digitals the cross works, but when pressing the Analog diectpad to be able to use both analog, the light blinks and does not stay on.

If you do not have any idea, or don’t want to do it get a friend who knows to help you. The parallel port of the computer to that you are connecting the cable is not the supplying enough power from the 5v, low current. If your controller doesn’t power up many racing controllers need more power than the parallel port can supply, for example you may want to try adding an external 5V power supply:.

  INTEL D945GCNL PCI DEVICE DRIVER DOWNLOAD

This can be a little tricky with two wires into one end of the DB connector.

They work for all pads including the dual-shock pads. Instead they would be connected like this:. Here is the Playstation interface schematic. Scissors or wire cutters.

Now we take the soldering iron and tin-plate the end of each diode taking care that you do not taking too long doing it or you can damage the diode by the heat. This site and all information contained within is Copyright Earle F.

Buy a second PSX extension cable and with a little skill you solder all wires to the same DB directpaf you used for your first pad except the wires that would go to pins 10 and 12 of the DB Disadvantages You will only be able to use it in Windows games, since driver it is programmed for DirectX.

Make sure that the voltage is 9v using a milti-meter.

Win9X Direct Pad Pro 5 installation

Make sure the colors are the same. Cut the cable with the scissors with care not cutting any of wiers that are in the interior. Connect it to pin 5 of the pads. Solder the wire to the end of the central diode and solder the 5 diodes together as it appears in the directad. If you have a PlayStation and a PCand do not have a pad for the computer, or simply those that there are in the market seem to you too expensive or any you don’t like, you have a great option here.

  LEXMARK X7750 DRIVER DOWNLOAD

You can connect simultaneously up to two pads. Remember that you must weld the 5 diodes in the correct direction.

Verify that it has at least 7 wires without counting the one that is bare. So if you don not want to do this you don’t have to.

Iomega, Syquest, SparQ, Jaz, Zip, and other names are trademarks or property of their respective owners. Maybe except to Calibrate the controller. Once connected everything it gives just as it is dual-shock or notwe verified in the configuration of the driver none of the buttons nor any directional ones work. Dirdctpad a cable of two threads of 0.

| DirectPad Pro | PlayStation

And we are now in the last of the mechanical part. And desire for an adventure itself The most common problem is that it does not do anything. All diodes are standard signal 1N diodes. If you want directapd use the dual-shock you will need an external power supply, or steal power from inside the computer. The scheme would be thus now:.

Author: admin